[0:00]hey everyone just want to show you this
[0:01]cuz I didn't even think to take that
[0:03]that drawer out that's the pots and pans
[0:06]that gives me much greater access in
[0:08]here I probably could have wrapped that
[0:12]in the silver stuff if I wanted to um
[0:15]but I got way more access so that I can
[0:17]do a lot more insulating back here it's
[0:20]going to be great can get to that easier
[0:24]I do need to be careful of those vents
[0:26]now chat GPT tells me sorry I guess I
[0:30]just doesn't I can't get it to kind of
[0:32]focus on it there you can see them Chad
[0:35]GPC says to give them like five um 5 in
[0:39]um of um room to
[0:42]breathe and they said that was
[0:44]conservative but I don't know what to
[0:46]think about that and you don't just
[0:48]trust CH GPT with everything it
[0:51]says but at least I've got way better
[0:54]access over there now and that's going
[0:56]to be really
[0:57]helpful this is coming along great guys
[1:00]so there's a lot of insulation behind
[1:02]all of that and all of
[1:05]this um I just had a thought I wanted to
[1:08]share I think one thing that would have
[1:09]made this better it's just some kind of
[1:12]very light board I mean it could even be
[1:14]poster board maybe maybe a little
[1:17]thicker something that just pushes this
[1:19]back a little bit the pink insulation
[1:21]back there so it doesn't make a bubble
[1:24]you know so it's just more
[1:25]flat um so I'm not sure how I would do
[1:29]that now
[1:30]but I think I'll be fine but if I were
[1:33]doing it again I I would be thinking
[1:35]about that so I just wanted to share
[1:37]that little
[1:38]tip I'm not so I just got some advice
[1:41]about not doing anything over here I
[1:44]think what I'll do is if you can you see
[1:47]that board there like I'm going to try
[1:49]to
[1:50]build it might be too close I I might do
[1:52]nothing cuz I do think it's good
[1:55]advice or I might just build a
[1:58]wall well right where this fall is you
[2:01]know well I guess there's a reason it's
[2:03]open
[2:04]huh I guess I really do just need to
[2:06]leave it
[2:08]alone um I'll figure out a way to
[2:10]insulate this part still that was the
[2:13]main reason that if I can I I'll be able
[2:16]to do that I can insulate this part over
[2:19]here leave the rest of this alone
[2:21]there's nothing else to do
[2:23]here um and then just this panel down
[2:25]here so it's coming along great I I this
[2:29]is just wonderful I think this is going
[2:31]to make such a big difference I'll also
[2:33]insulate up here I might even do it for
[2:35]the one over
[2:37]here cuz I think it'll be out of the way
[2:39]you know I just feel like any little bit
[2:41]helps whatever I can do it's just been
[2:44]so cold in here so that's all for
[2:48]now okay so this is what I've got
[2:53]now oops guys right so here's what I got
[2:57]now so far and I just put this here I
[3:00]need to kind of tape it in I don't know
[3:02]how well this will work you know I'm
[3:04]just trying to build my floor there
[3:06]basically so that I can um take that
[3:09]area and insulate
[3:11]it uh I guess that area doesn't really
[3:13]need it because it's not you know coming
[3:15]from the outside
[3:17]but I'll do it anyways just to be
[3:21]thorough you know um so I'm just going
[3:24]to leave all that area alone just going
[3:27]to leave it alone won't go anywhere near
[3:31]looks like the sun's starting to set
[3:32]it's getting a little bit colder in here
[3:35]um but it's pretty nice like it's within
[3:37]it's like
[3:39]70° it's just starting to drop now so at
[3:42]some point you have to say good enough I
[3:45]think I reached that point a little
[3:47]while ago so I'm just going to show you
[3:48]what I've done
[3:50]here so that's that's what this panel
[3:52]looks like now figured I'll leave that
[3:55]alone for now if I need to insulate it
[3:57]later I will I'm going to see if it gets
[3:58]cold
[4:00]um when I get one of those laser
[4:02]thermometer
[4:04]things I'm going to leave that
[4:06]alone feel like I did enough there I
[4:09]could technically like I can bring it up
[4:12]to probably here like all
[4:15]across um for the D for that drawer but
[4:18]I'm just going to leave it like it is
[4:19]for
[4:20]now it's very well insulated really is
[4:26]so just just a very tiny bit of pink
[4:30]insulation showing I left that whole
[4:32]area
[4:33]alone I wrapped it around a little bit
[4:37]had to do that um by hand couldn't see
[4:39]what I was doing
[4:41]really um so
[4:45]yeah I've still got the one area left
[4:48]you know over over there but um the
[4:51]last well the last panel the three of
[4:54]the three panels going to put this in
[4:58]now it's perfect
[5:06]perfect could technically um you can go
[5:09]like a little bit up
[5:11]here and you got just a good distance in
[5:14]there you can't see it from here like
[5:17]there's a good
[5:20]distance but I'll see how this does you
[5:23]know I'm real happy this is my first big
[5:26]project and there's definitely a lot
[5:29]more to do but this is one thing that I
[5:30]can finally check off my list you guys
[5:33]have been awesome thanks for
[5:35]watching